Rain Bird 752 Metric Nozzle Chart

Rain Bird 752 nozzle performance in metric units

This page presents selected metric performance data for Rain Bird 752 Series full and part-circle golf rotors. It is intended as a clear field and planning reference for UK golf and sports turf teams.

The values below were checked against Rain Bird's current 752 Series technical specification retrieved on 8 September 2026. The official file path is dated May 2025 and the document carries code D37603 with a 1/21 footer. Always confirm that the rotor body, nozzle housing, nozzle and pressure regulation on site match the referenced configuration.

Reference scope

  • Rotor: Rain Bird 752 Series
  • Nozzles: Dual Spreader nozzles with standard nozzle housing
  • Pressure tables: 4.8 bar and 5.5 bar
  • Units: metres, cubic metres per hour and litres per second
  • Manufacturer source: current Rain Bird PDF retrieved 8 September 2026; file path dated May 2025; document code D37603, footer 1/21

Rain Bird describes the distance as radius. On site, this is the sprinkler throw in metres. Flow in m³/h is shown first, with l/s retained from the source data.

The manufacturer lists an overall radius range of 5.8 to 25.6 metres and a flow range of 0.42 to 2.97 litres per second across the complete published operating data. The 4.8 and 5.5 bar tables below reflect the two factory pressure-regulator settings stated for the 752 E and IC models.

Rain Bird 752 at 4.8 bar

On a phone: swipe left and right across the table to see every column.

Rain Bird 752 Dual Spreader nozzle performance at 4.8 bar
Nozzle Colour Standard radius (m) Low-angle radius (m) Flow (m³/h) Flow (l/s)
18 Beige 9.1 6.1 1.75 0.49
20 Grey 11.3 10.4 1.92 0.53
22 Red 13.4 12.5 2.32 0.64
24 Plum 14.3 13.4 2.18 0.61
26 Light green 15.5 14.3 2.48 0.69
28 White 17.7 17.1 3.99 1.11
32 Blue 19.2 18.0 4.62 1.28
36 Yellow 20.1 19.5 5.27 1.46
40 Orange 20.4 20.1 5.98 1.66
44 Green 21.0 20.7 6.49 1.80
48 Black 23.2 21.3 7.15 1.99
50 Dark brown 24.1 20.7 8.94 2.48

Rain Bird 752 at 5.5 bar

Rain Bird 752 Dual Spreader nozzle performance at 5.5 bar
Nozzle Colour Standard radius (m) Low-angle radius (m) Flow (m³/h) Flow (l/s)
18 Beige 9.5 6.4 1.84 0.51
20 Grey 11.6 10.7 2.06 0.57
22 Red 13.4 12.8 2.45 0.68
24 Plum 14.6 13.4 2.31 0.64
26 Light green 15.5 14.9 2.64 0.73
28 White 17.7 17.4 4.27 1.19
32 Blue 19.2 18.6 4.94 1.37
36 Yellow 20.7 19.8 5.61 1.56
40 Orange 20.7 20.4 6.34 1.76
44 Green 21.6 21.3 6.95 1.93
48 Black 23.2 22.0 7.71 2.14
50 Dark brown 24.7 21.3 9.52 2.64

How to read the chart

Standard radius refers to the published result for the standard nozzle arrangement. Low-angle radius refers to the published low-angle result. Base pressure is the pressure at the sprinkler, not simply the pressure shown at the pump station.

Published performance figures are a selection reference, not a guarantee of field coverage. Wind, elevation, sprinkler spacing, nozzle condition, regulation, pipe losses and available system flow all affect the result on an operating course.

Do not select on radius alone

  • Confirm the pressure available at the sprinkler while the intended irrigation group is operating.
  • Check total flow demand against the pump, storage and distribution network.
  • Consider full-circle and part-circle application, spacing and the surrounding nozzle layout.
  • Check the installed nozzle housing, pressure regulator and equipment condition.
  • Review whether an apparent nozzle problem is actually caused by pipework, regulation, valve or pump performance.

Manufacturer source

Open the official Rain Bird 752 Series technical specification

Rain Bird and 752 are manufacturer trademarks and model references. JK Irrigation has reformatted selected published values into an original metric table for practical reference. Rain Bird remains the authority for current product data.

Related technical support

View the Irrigation Reference Library

Explore golf course irrigation

Understand water, pumps and distribution

Explore practical irrigation training

Discuss a system or nozzle requirement